Effects of mechanical characteristics on the chemical-mechanical polishing of dielectric thin films
檔案
- A1996WB81900088.pdf (446.0 KB, Adobe PDF)
日期
1996-12-15
系所
期刊名稱
THIN SOLID FILMS
卷期與頁次
第 290 卷,頁 458–463
ISSN
0040-6090
語言
英文
摘要
The effects of as-deposited (intrinsic) stress, externally applied (extrinsic) stresses, hardness, and modulus of various dielectric firms on chemical-mechanical polishing (CMP) removal and post-CMP cleaning processes are studied in this article. Intrinsic stresses of the polished dielectrics do not contribute directly to the CMP removal rate. Extrinsic stresses including normal and shear components are calculated using principles of elasticity and fluid mechanics respectively and their roles in the material removal process are discussed. Theoretical evaluation and experimental results both suggest that hardness and modulus are the two most important material characteristics affecting the CMP process. Efficiency of post-CMP particle extraction can be monitored using an adhesion probability which is related to the hardness of wafer and pad. Tn addition, particle removal rate can be remarkably enhanced by increasing pressure (normal stress) while increasing pad rotation speed (shear stress) contributes little to reduce the particle count.
所屬典藏
會議論文引用此條目
Tseng, W., Liu, C., Dai, B., & Yeh, C. (1996). Effects of mechanical characteristics on the chemical-mechanical polishing of dielectric thin films. THIN SOLID FILMS, 290, 458–463. https://doi.org/10.1016/S0040-6090(96)09020-7
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/873