標題: A monolithic current-mode buck converter with advanced control and protection circuits
作者: Ma, Feng-Fei
Chen, Wei-Zen
Wu, Jiin-Chuan
電子工程學系及電子研究所
Department of Electronics Engineering and Institute of Electronics
關鍵字: compensation ramp;current sensing;current-mode control;over-current protection;power management;pulse frequency modulation (PFM);pulse width modulation (PWM);soft-start;switching dc-dc converter
公開日期: 1-九月-2007
摘要: A monolithic current-mode pulse width modulation (PWM) step-down dc-dc converter with 96.7% peak efficiency and advanced control and protection circuits is presented in this paper. The high efficiency is achieved by "dynamic partial shutdown strategy" which enhances circuit speed with less power consumption. Automatic PWM and "pulse frequency modulation" switching boosts conversion efficiency during light load operation. The modified current sensing circuit and slope compensation circuit simplify the current-mode control circuit and enhance the response speed. A simple high-speed over-current protection circuit is proposed with the modified current sensing circuit. The new on-chip soft-start circuit prevents the power on inrush current without additional off-chip components. The dc-dc converter has been fabricated with a 0.6 mu m CMOS process and measured 1.35 mm(2) with the controller measured 0.27 mm(2). Experimental results show that the novel on-chip soft-start circuit with longer than 1.5 ms soft-start time suppresses the power-on inrush current. This converter can operate at 1.1 MHz with supply voltage from 2.2 to 6.0 V. Measured power efficiency is 88.5-96.7% for 0.9 to 800 mA output current and over 85.5% for 1000 mA output current
URI: http://dx.doi.org/10.1109/TPEL.2007.904237
http://hdl.handle.net/11536/10393
ISSN: 0885-8993
DOI: 10.1109/TPEL.2007.904237
期刊: IEEE TRANSACTIONS ON POWER ELECTRONICS
Volume: 22
Issue: 5
起始頁: 1836
結束頁: 1846
顯示於類別:期刊論文


文件中的檔案:

  1. 000249447700025.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。