Full metadata record
DC FieldValueLanguage
dc.contributor.authorTseng, Yuhwaien_US
dc.contributor.authorSu, Chauchinen_US
dc.contributor.authorHo, Yingchiehen_US
dc.date.accessioned2019-04-03T06:44:24Z-
dc.date.available2019-04-03T06:44:24Z-
dc.date.issued2016-02-11en_US
dc.identifier.issn1932-6203en_US
dc.identifier.urihttp://dx.doi.org/10.1371/journal.pone.0148964en_US
dc.identifier.urihttp://hdl.handle.net/11536/132686-
dc.description.abstractBackground Intra-body communication is a new wireless scheme for transmitting signals through the human body. Understanding the transmission characteristics of the human body is therefore becoming increasingly important. Electrostatic-coupling intra-body communication system in a ground-free situation that integrate electronic products that are discretely located on individuals, such as mobile phones, PDAs, wearable computers, and biomedical sensors, are of particular interest. Materials and Methods The human body is modeled as a simplified Resistor-Capacitor network. A virtual ground between the transmitter and receiver in the system is represented by a resister-capacitor network. Value of its resistance and capacitance are determined from a system perspective. The system is characterized by using a mathematical unit step function in digital baseband transmission scheme with and without Manchester code. As a result, the signal-to-noise and to-intersymbol-interference ratios are improved by manipulating the load resistor. The data transmission rate of the system is optimized. A battery-powered transmitter and receiver are developed to validate the proposal. Results A ground-free system fade signal energy especially for a low-frequency signal limited system transmission rate. The system transmission rate is maximized by simply manipulating the load resistor. Experimental results demonstrate that for a load resistance of 10k-50k Omega, the high-pass 3 dB frequency of the band-pass channel is 400kHz-2MHz in the worst-case scenario. The system allows a Manchester-coded baseband signal to be transmitted at speeds of up to 20M bit per second with signal-to-noise and signal-to-intersymbol-interference ratio of more than 10 dB. Conclusion The human body can function as a high speed transmission medium with a data transmission rate of 20Mbps in an electrostatic-coupling intra-body communication system. Therefore, a wideband signal can be transmitted directly through the human body with a good signal-to-noise quality of 10 dB if the high-pass 3 dB frequency is suitably selected.en_US
dc.language.isoen_USen_US
dc.titleEvaluation and Verification of Channel Transmission Characteristics of Human Body for Optimizing Data Transmission Rate in Electrostatic-Coupling Intra Body Communication System: A Comparative Analysisen_US
dc.typeArticleen_US
dc.identifier.doi10.1371/journal.pone.0148964en_US
dc.identifier.journalPLOS ONEen_US
dc.citation.volume11en_US
dc.citation.issue2en_US
dc.citation.spage0en_US
dc.citation.epage0en_US
dc.contributor.department電控工程研究所zh_TW
dc.contributor.departmentInstitute of Electrical and Control Engineeringen_US
dc.identifier.wosnumberWOS:000370050700049en_US
dc.citation.woscount0en_US
Appears in Collections:Articles


Files in This Item:

  1. 0ece7555b9694873561fda73daf4fed8.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.