Effect of thermal treatment on resistive switching characteristics in Pt/Ti/Al2O3/Pt devices
檔案
本條目沒有附加檔案。
日期
2008-12-25
類型
系所
期刊名稱
SURFACE & COATINGS TECHNOLOGY
卷期與頁次
第 203 卷,頁 628–631
ISSN
0257-8972
語言
英文
摘要
Resistive switching characteristics of Pt/Ti/Al2O3/Pt memory devices annealed at various temperatures including 400 degrees C, 500 degrees C and 600 degrees C for 1 h under ambient condition were investigated in the study. The Al2O3 thin films annealed at up to 600 degrees C for 1 h remain amorphous phase based on the X-ray diffraction (XRD) analyses. As increasing annealing temperature, the forming voltage (activating the pristine device) of the memory device decreases in contrast to the rising trend of the turn-on voltage (switching from high to low resistance state). However, the turn-off voltage (switching from low to high resistance state) is almost uninfluenced by thermal annealing. These phenomena might be attributed to the interdiffusion between Ti and Al2O3, based on the analyzed results of secondary ion mass spectroscopy (SIMS) and high resolution transmission electron microscope (HR-TEM). Moreover, the thermal annealing process eventually creates high conducting paths with a high density of oxygen vacancies between the two electrodes. (c) 2008 Elsevier B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Lin, C.-Y., Lee, D.-Y., Wang, S.-Y., Lin, C.-C., & Tseng, T.-Y. (2008). Effect of thermal treatment on resistive switching characteristics in Pt/Ti/Al2O3/Pt devices. SURFACE & COATINGS TECHNOLOGY, 203, 628–631. https://doi.org/10.1016/j.surfcoat.2008.06.133
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/149657