Electromigration Failure Mechanism in Sn-Cu Solder Alloys with OSP Cu Surface Finish
檔案
- 000307289400029.pdf (764.2 KB, Adobe PDF)
日期
2012-09-01
類型
系所
期刊名稱
JOURNAL OF ELECTRONIC MATERIALS
卷期與頁次
第 41 卷第 9 期
ISSN
0361-5235
語言
英文
摘要
"Organic solderable preservative (OSP) has been adopted as the Cu substrate surface finish in flip-chip solder joints for many years. In this study, the electromigration behavior of lead-free Sn-Cu solder alloys with thin-film under bump metallization and OSP surface finish was investigated. The results showed that severe damage occurred on the substrate side (cathode side), whereas the damage on the chip side (cathode side) was not severe. The damage on the substrate side included void formation, copper dissolution, and formation of intermetallic compounds (IMCs). The OSP Cu interface on the substrate side became the weakest point in the solder joint even when thin-film metallization was used on the chip side. Three-dimensional simulations were employed to investigate the current density distribution in the area between the OSP Cu surface finish and the solder. The results indicated that the current density was higher along the periphery of the bonding area between the solder and the Cu pad, consistent with the area of IMC and void formation in our experimental results."
所屬典藏
期刊論文引用此條目
Chu, M.-H., Liang, S. W., Chen, C., & Huang, A. T. (2012). Electromigration Failure Mechanism in Sn-Cu Solder Alloys with OSP Cu Surface Finish. JOURNAL OF ELECTRONIC MATERIALS, 41(9). https://ir.lib.nycu.edu.tw/handle/11536/16715
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/16715