Hole injection and efficiency droop improvement in InGaN/GaN light-emitting diodes by band-engineered electron blocking layer

Abstract

A graded-composition electron blocking layer (GEBL) with aluminum composition increasing along the [0001] direction was designed for c-plane InGaN/GaN light-emitting diodes (LEDs) by employing the band-engineering. The simulation results demonstrated that such GEBL can effectively enhance the capability of hole transportation across the EBL as well as the electron confinement. Consequently, the LED with GEBL grown by metal-organic chemical vapor deposition exhibited lower forward voltage and series resistance and much higher output power at high current density as compared to conventional LED. Meanwhile, the efficiency droop was reduced from 34% in conventional LED to only 4% from the maximum value at low injection current to 200 A/cm(2). (C) 2010 American Institute of Physics. [doi:10.1063/1.3531753]