標題: BGA cutter improvement utilizing nano-TiAlN coating layers synthesized by cathodic arc ion plating process
作者: Huang, Sung-Hsiu
Hsieh, Tsung-Eong
Chen, Jia-Wei
材料科學與工程學系
Department of Materials Science and Engineering
關鍵字: TiAlN;Nanocomposite;Cathodic arc ion plating;BGA cutter;TEM
公開日期: 25-Dec-2009
摘要: Ti/Al targets with various concentration ratios, Ti(0.75)Al(0.25), Ti(0.66)Al(0.33), Ti(0.5)Al(0.5) and Ti(0.33)Al(0.66) were used in a filtered cathodic arc ion plating system (FCAIP) to deposit the multilayer TiAlN films on Si wafer substrates and WC cermet ball grid array (BGA) cutters at various modulation wavelengths. Transmission electron microscopy (TEM), nanoindentation and BGA router were used to evaluate the characteristics of TiAlN layers and the performance of BGA cutters. TEM analysis revealed that the modulation wavelengths of deposited layers are less than 10 nm at various rotation speeds in FCAIP chamber and the crystal structure of TiAlN layer with the maximum hardness is NaCl-B1 structure using the Ti(0.5)Al(0.5) target The maximum hardness of multiple TiAlN layers measured by nanoindentation was 43 GPa,while the TiAlN monolayer exhibited the maximum hardness of 30 GPa in the same chamber. The TiAlN-coated BGA cutter deposited at the optimized condition exhibited a twice longer life and a higher machining speed in comparison with the conventional cutter. (C) 2009 Elsevier B.V. All rights reserved.
URI: http://dx.doi.org/10.1016/j.surfcoat.2009.05.014
http://hdl.handle.net/11536/27275
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2009.05.014
期刊: SURFACE & COATINGS TECHNOLOGY
Volume: 204
Issue: 6-7
起始頁: 988
結束頁: 991
Appears in Collections:Conferences Paper


Files in This Item:

  1. 000272859500047.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.