標題: 覆晶式發光二極體P型氮化鎵高反射鉑/銀/鉑/金歐姆電極之研究
Highly reflective Pt/Ag/Pt/Au ohmic contacts to p-type GaN for flip-chip LED
作者: 林洋森
Yang-Sem Lin
周武清
Wu-Ching Chou
關鍵字: 發光二極體;氮化鎵;歐姆接觸;高反射;light emitting diode;GaN;ohmic contact;highly reflective
公開日期: 2007
摘要: 我們利用鉑/銀/鉑/金的金屬組合,具有高反射率及低電阻的特性,運用在p型氮化鎵歐姆接觸電極上,經過270℃熱處理之後,鉑與p型氮化鎵半導體相互擴散形成鉑-鎵合金,半導體中鎵金屬的空缺增加p型氮化鎵載子濃度,降低蕭基接面位障,使費米能階往低能量方向移動,在外加偏壓時形成良好的歐姆接觸。在電流20mA下的順向電壓值可降低至2.96V,在波長470nm的反射率也可維持在高水準86%,運用在覆晶式元件軸向光強度比傳統覆晶發光二極體元件提升36%。
Pt/Ag/Pt/Au multiple layer structure was used as highly reflective and low-resistivity Ohmic contact to the p-type semiconductor. Under 270oC heat treatment, inter-diffusions between Pt and Ga atoms at the interface of the metal contact and the p-ype GaN occur. It results an increase in the carrier concentration in the p-type GaN and further lowers the Schottky barrier and Fermi level to form good Ohmic contact. At 20 mA injection, the turn-on voltage can be reduced to 2.96 V and the reflectivity can be maintained at 86% at 470 nm. The luminous intensity of flip-chip LED with mirror system is raised by 36% higher than that of conventional flip-chip LED.
URI: http://140.113.39.130/cdrfb3/record/nctu/#GT009491503
http://hdl.handle.net/11536/37923
Appears in Collections:Thesis


Files in This Item:

  1. 150301.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.