Full metadata record
DC FieldValueLanguage
dc.contributor.author鄭隆傑en_US
dc.contributor.authorLong-Jye Jengen_US
dc.contributor.author金甘平en_US
dc.contributor.authorKan-Ping Chinen_US
dc.date.accessioned2014-12-12T02:26:04Z-
dc.date.available2014-12-12T02:26:04Z-
dc.date.issued2000en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#NT890489024en_US
dc.identifier.urihttp://hdl.handle.net/11536/67524-
dc.description.abstract本論文主要在探討300 mm型多腔式半導體製程設備晶圓處理的最佳排程。論文中將介紹300 mm型多腔式半導體製程設備的硬體架構和晶圓在此設備中的處理方式和流程,在瞭解系統架構和晶圓處理流程後,我們將介紹論文中的建模方法Petri Net,以及如何在此模型之狀態空間中尋找最佳排程的搜尋法則-A*演算法。在文中會以實際例子說明建模方式和擴充方法。在建模及搜尋方式確定後,我們以C++程式語言實作最佳排程的搜尋程式,完成後透過這個程式讓我們可以更改系統硬體配備(腔體數、機械臂型式…等)和時間參數,並將該設定條件下的最佳晶圓產出率找出。如此我們將可探討可能影響系統產出率的因素,並加以改進來提高晶圓產出率。zh_TW
dc.description.abstractThis paper is focused on the scheduling of the 300 mm cluster tool. We use a Petri Net approach to model the system, and use an A* algorithm to search the best schedule in reachability graph of Petri Net model of the system. In this paper, we introduce the hardware of the 300 mm cluster tool first, and then we will show how to use a Petri Net approach to model the system and how to search the optimal schedule for wafer processing. Finally, C++ programming language is applied to implement the search algorithm mentioned above. After building the program which helps us to find the optimal schedule of wafer processing, we will change system parameters which might affect wafer throughput to find the highest throughput using modified setting.en_US
dc.language.isozh_TWen_US
dc.subject300 mm 型多腔式半導體製程設備zh_TW
dc.subjectA* 演算法zh_TW
dc.subject晶圓生產週期zh_TW
dc.subjectcluster toolen_US
dc.subjectPetri Neten_US
dc.title300 mm型多腔式製程設備之建模及自動化排程zh_TW
dc.titleModeling and Scheduling of 300 mm Cluster Tools Using a Petri-Net Approachen_US
dc.typeThesisen_US
dc.contributor.department機械工程學系zh_TW
Appears in Collections:Thesis