標題: 模具內的剪切操作對於iPP/PC聚摻物射出成形品的材料結構的影響之研究
Effects of Shearing in Injection Mold on the Structure of iPP/PC Blends
作者: 紀坤宏
Kun-Hung Chi
陳仁浩
Ren-Haw Chen
機械工程學系
關鍵字: 剪切操作;iPP/PC聚摻物;相分佈形態;球晶形態;抗拉強度;shearing operation;iPP/PC blends;phase morphology;spherulite;tensile strength
公開日期: 2004
摘要: 本研究乃針對在射出成形的過程中,溫度履歷與剪切操作對於iPP/PC聚摻物高階結構的影響進行研究。設計一可主動控制剪應變速率之射出成形模具,在實際射出成形過程的保壓階段,對熔融iPP/PC聚摻物直接施予剪切操作。 研究結果顯示: PC的重量比例低於20%之iPP/PC聚摻物,可改進純iPP之物性;施予剪切操作後,可有效改善聚摻物內的相分佈形態,有助材料性能之提昇;且剪切操作可使聚摻物內iPP相之球晶形態,由原為多數的混合型球晶轉變形成較小而細緻之α球晶,對其抗拉強度之物性有增強之效果。
This study is investigated the phase morphologies which are affected by the thermal history and shearing during the injection molding processing. The mold is designed for actively controlled shear rate in the processing of the holding pressure and iPP/PC blends are conducted directly by the shearing operation in the cavity. The results show that the mechanical properties of pure iPP are enhanced in iPP/PC blends by shearing operation while the weight fractions of PC are below 20%. Therefore, the distribution of phase morphologies is improved effectively and the performance of the blends is enhanced after shearing operation. The type of spherulite is transformed the majority of mixed type into many tiny α-spherulites and the tensile strength of the specimens are also be enhanced after shearing.
URI: http://140.113.39.130/cdrfb3/record/nctu/#GT009214508
http://hdl.handle.net/11536/71034
顯示於類別:畢業論文


文件中的檔案:

  1. 450801.pdf
  2. 450802.pdf
  3. 450803.pdf
  4. 450804.pdf
  5. 450805.pdf
  6. 450806.pdf
  7. 450807.pdf
  8. 450808.pdf
  9. 450809.pdf
  10. 450810.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。