A clock generator with cascaded dynamic frequency counting loops for wide multiplication range applications
檔案
- 000238153800005.pdf (1.44 MB, Adobe PDF)
日期
2006-06-01
類型
系所
期刊名稱
IEEE JOURNAL OF SOLID-STATE CIRCUITS
卷期與頁次
第 41 卷第 6 期,頁 1275–1285
ISSN
0018-9200
語言
英文
摘要
This work presents a clock generator with cascaded dynamic frequency counting (DFC) loops for wide multiplication range applications. The DFC loop, which uses variable time period to estimate and tune the frequency of the digitally controlled oscillator (DCO), enhances the resolution of frequency detection. The conventional phase-frequency detector (PFD) and programmable divider are replaced with a digital arithmetic comparator and a DCO timing counter. The value in the DCO timing counter is separated into quotient and remainder vectors. A threshold region is set in the remainder vector to reduce the influence of jitter variation in frequency detection. The loop stability can be retained by cascading two DFC loops when the multiplication factor (N) is large. The proposed clock generator achieves a multiplication range from 4 to 13 888 with output peak-to-peak jitter less than 2.8% of clock period. A test chip for the proposed clock generator is fabricated in 0.18-mu m CMOS process with core area of 0.16 mm(2). Power consumption is 15 mW.@ 378 MHz with 1.8-V supply voltage.
關鍵詞
clock generatordigitally controlled oscillator (DCO)digitally controlled varactor (DCV)dynamic frequency counting (DFC)phase-locked loop (PLL)所屬典藏
期刊論文引用此條目
Chen, P., Chung, C., Yang, J., & Lee, C. (2006). A clock generator with cascaded dynamic frequency counting loops for wide multiplication range applications. IEEE JOURNAL OF SOLID-STATE CIRCUITS, 41(6), 1275–1285. https://doi.org/10.1109/JSSC.2006.874273
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/12194