Low-Temperature Microwave Annealing Processes for Future IC Fabrication-A Review
檔案
- 000332040700001.pdf (7.31 MB, Adobe PDF)
日期
2014-03-01
作者
類型
期刊名稱
IEEE TRANSACTIONS ON ELECTRON DEVICES
卷期與頁次
第 61 卷第 3 期,頁 651–665
ISSN
0018-9383
語言
英文
摘要
Microwave annealing (MWA) and rapid thermal annealing (RTA) of dopants in implanted Si are compared in their abilities to produce very shallow and highly activated junctions. First, arsenic (As), phosphorus (P), and BF2 implants in Si substrate were annealed by MWA at temperatures below 550 degrees C. Next, enhancing the substitutional carbon concentration ([C] sub) by cluster carbon implantation in (100) Si substrates with MWA or RTA techniques was investigated. Annealing temperatures and time effects were studied. Different formation mechanisms of SiCx layer were observed. In addition, substrate temperature is an important factor for dopant activation during MWA and in situ doped a-Si on oxide/Si substrate or glass were compared to elucidate the substrate temperature effect. After the discussion of dopant activation in Si substrates, low temperature formation of ultrathin NiGe layer is presented. Ultrathin NiGe films with low sheet resistance have been demonstrated with a novel two-step MWA process. In the two-step MWA process, the first step anneals the sample with low power MWA, and the second step applies higher power MWA for reducing sheet resistance. During fixed-frequency microwave heating, standing wave patterns may be present in the MWA chamber resulting in nodes and antinodes and thermal variations over the process wafer. Therefore, the effects of Si or quartz susceptor wafers on dopant activation and sheet resistance uniformity during fixed-frequency MWA were investigated.
關鍵詞
Dopant activationlow temperaturemicrowavemicrowave annealing (MWA)NiGesolid phase epitaxial growth (SPEG)temperature effectuniformity所屬典藏
期刊論文引用此條目
Lee, Y.-J., Cho, T.-C., Chuang, S.-S., Hsueh, F.-K., Lu, Y.-L., Sung, P.-J., Chen, H.-C., Current, M. I., Tseng, T.-Y., Chao, T.-S., Hu, C., & Yang, F.-L. (2014). Low-Temperature Microwave Annealing Processes for Future IC Fabrication-A Review. IEEE TRANSACTIONS ON ELECTRON DEVICES, 61(3), 651–665. https://doi.org/10.1109/TED.2014.2300898
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/24017