標題: Fabricating thin-film transistors on plastic substrates using spin etching and device transfer
作者: Wang, SC
Yeh, CF
Hsu, CT
Lou, JC
電子工程學系及電子研究所
Department of Electronics Engineering and Institute of Electronics
公開日期: 2005
摘要: This work presents a novel method for transferring thin-film transistors (TFTs) from a Si wafer to another flexible plastic substrate. First, high-performance poly-Si TFTs were fabricated on a 1.5 mu m thick SiO2 on a Si wafer and then attached to a flexible plastic substrate by optical adhesive. Next, spin-etching was utilized to remove the backside Si, using SiO2 as a stopping layer. A qualitative model was established to explain the relationship between the chemical flow rate/rotation speed to the etching rate and the uniformity of Si removal. The Si etching rate exceeded 200 mu m/min while the Si to SiO2 selectivity of 250 was maintained given optimized spin-etching parameters. Substrate bonding and Si spin-etching steps caused no degradation or yield loss as compared to the electrical characteristics before transference. Additionally, extrinsic stress only weakly affected the properties of poly-Si resistors and TF`Ts on a flexible plastic substrate. (c) 2005 The Electrochemical Society. [DOI: 10. 1149/1.1860491] All rights reserved.
URI: http://hdl.handle.net/11536/25527
http://dx.doi.org/10.1149/1.1860491
ISSN: 0013-4651
DOI: 10.1149/1.1860491
期刊: JOURNAL OF THE ELECTROCHEMICAL SOCIETY
Volume: 152
Issue: 3
起始頁: G227
結束頁: G233
Appears in Collections:Articles


Files in This Item:

  1. 000227607300068.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.