Fully process-compatible layout design on bond pad to improve wire bond reliability in CMOS ICs

檔案

日期

2002-06-01

類型

期刊名稱

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES

卷期與頁次

第 25 卷第 2 期,頁 309–316

ISSN

1521-3331

語言

英文

摘要

During manufacture of wire bonding in packaged IC products, the breaking of bond wires and the peeling of bond pads occur frequently. The result is open-circuit failure in IC products. There were several prior methods reported to overcome these problems by using additional process flows or special materials. In this paper, a layout method is proposed to improve the bond wire reliability in general CMOS processes. By changing the layout patterns of bond pads, the reliability of bond wires on bond pads can be improved. A set of different layout patterns of bond pads has been drawn and fabricated in a 0.6-mum single-poly triple-metal CMOS process for investigation by the bond wire reliability tests, the ball shear test and the wire pull test. By implementing effective layout patterns on bond pads in packaged IC products, not only the bond wire reliability can be improved, but also the bond pad capacitance can be reduced for high frequency application. The proposed layout method for bond pad design is fully process-compatible to general CMOS processes.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Ker, M., & Peng, J. (2002). Fully process-compatible layout design on bond pad to improve wire bond reliability in CMOS ICs. IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 25(2), 309–316. https://doi.org/10.1109/TCAPT.2002.1010022

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/28756