標題: 使用物件導向之設計模型於現場監控系統規劃
Shop Floor Control System Design Using Object-Oriented Design Patterns
作者: 李景民
Lee, Gin-Min
胡竹生
Hu Jwu-Sheng
電控工程研究所
關鍵字: 物件導向;設計模型;現場監控;監控系統;Shop Floor Control;Object-Oriented;Design Pattern
公開日期: 1996
摘要: 在電腦整合製造裡,現場監控系統扮演實際資料與資訊系統連結的關
鍵角色。在大型工廠中,其完整的現場監控系統可能非常複雜。因此,必
須利用適當的分析與設計方法,才能降低系統的複雜度並縮短系統的開發
時程。 本研究係以物件導向的概念為基礎來發展一套適合現場監控系
統開發之方法。其目的是希望藉由模組化的技術與設計模型(Design
Pattern)的分析,將受控系統的結構與行為逐步轉變成主控系統之功能
規格。尤其是,我們著重於找出建構製造系統中所需用到的最基本類別及
其間相互關係。以這些基本類別為基礎,設計SFCS的所遭遇的困難因而得
以減輕。 最後將所提出的方法,建構出跨網路之圖形介面以模擬光罩
管理系統的實際環境。
In computer integrated manufacturing system, Shop Floor
Control System(SFCS) plays an important role of linking physical
data with the information system. In large plants, a complete
SFCS could be very complex. Therefore, proper analysis and
design methods must be used in order to reduce the complexity
and design cycle time. In this thesis, a SFCS development
method, based on object-oriented concepts, is proposed. The
objective is to transform the structure and behavior of the
plant into the specification of the controller by using design-
pattern analysis and modularization techniques. In particular,
we focus on finding out some fundamental object classes in a
manufacturing system. Based on these classes, the difficulty of
designing large SFCS can be reduced. The proposed method is
implemented on a reticle management system. A graphically based
interface across network is designed to mimic a realistic
environment.
URI: http://140.113.39.130/cdrfb3/record/nctu/#NT850327027
http://hdl.handle.net/11536/61682
Appears in Collections:Thesis