標題: Design optimization of ESD protection and latchup prevention for a serial I/O IC
作者: Huang, CY
Chen, WF
Chuan, SY
Chiu, FC
Tseng, JC
Lin, IC
Chao, CJ
Leu, LY
Ker, MD
電子工程學系及電子研究所
Department of Electronics Engineering and Institute of Electronics
公開日期: 1-Feb-2004
摘要: ESD/latchup are often two contradicting variables during IC reliability development. Trade-off between the two must be properly adjusted to realize ESD/latchup robustness of IC products. A case study on SERIAL Input/Output (I/O) IC's is reported here to reveal this ESD/latchup optimization issue. SERIAL I/O IC features a special clamping property to wake up PC's during system standby situation. Along with high voltage operation, Input/Output (I/O) protection design of this IC becomes one of the most challenging tasks in the product reliability development. In the initial development phase, ignorance of latchup susceptibility resulted in severe Electrical Overstress (EOS) damage during latchup tests, and also gave a false over estimate of ESD protection threshold through parasitic latchup paths. The latchup origin is an output PMOS and floating-well ESD triggering NMOS beside the PMOS, and the main fatal link is this high-voltage (HV) NMOS connecting to a bi-directional SCR cell. This fatal link led to totally five latchup sites and three latchup paths clarified through careful and intensive FIB failure analysis, while this powerful SCR ESD device without appropriate triggering mechanism still could not provide sufficient product-level ESD hardness. Owing to there being no design window between ESD and latchup, the original several protection schemes were all abandoned. Using this bi-directional SCR ESD cell and proper triggering PNP bipolar transistors, a new I/O protection circuit could sustain at least ESD/HBM 4 kV and latchup triggering current 150 mA tests, thus accomplish the best optimization of ESD/latchup robustness. (C) 2003 Elsevier Ltd. All rights reserved.
URI: http://dx.doi.org/10.1016/j.microrel.2003.09.008
http://hdl.handle.net/11536/27100
ISSN: 0026-2714
DOI: 10.1016/j.microrel.2003.09.008
期刊: MICROELECTRONICS RELIABILITY
Volume: 44
Issue: 2
起始頁: 213
結束頁: 221
Appears in Collections:Articles


Files in This Item:

  1. 000188958300004.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.